2. Attention - Allen key torque
Screw
Size |
Allen Key Size |
Diameter |
L e n g t h |
Min Locking
Force |
Locking Force |
Action Point of
Force |
(mm) |
L1 x L2(mm) |
Nm (kgf - cm) |
F (kgf) |
L3(mm) |
M4 |
3 |
3 |
20 x 125 |
3.0(30) |
6 |
50 |
M5 |
4 |
4 |
25 x 150 |
6.2(63) |
6.3 |
100 |
M6 |
5 |
5 |
9.9 |
9.9(101) |
10.1 |
100 |
M8 |
6 |
6 |
32 x 180 |
22.0(224) |
14.9 |
150 |
M10 |
8 |
8 |
36 x 200 |
48.0(490) |
16.3 |
300 |
M12 |
10 |
10 |
40 x 225 |
86.0(878) |
18.6 |
600 |
M16 |
14 |
14 |
50 x 140 |
142.0(1449) |
21.7 |
600 |
M20 |
17 |
17 |
60 x 180 |
276.0(2816) |
24.2 |
1300 |
M24 |
19 |
19 |
80 x 180 |
495.0(5050) |
38.8 |
1300 |
|
|
|
|
|
|
|
ATTENTION
-
Have the screw well locked with proper allen key and torque listed above.
-
Make sure that the nut had been well attached to the surface of the locked part.
-
The operator should adjust the locking force F & Action pointof force L3 according to actual condition.